WEBVTT

00:00:00.000 --> 00:00:01.600 position:50% size:92% align:center
Start in Config Tool with the new camera’s default Region settings.

00:00:01.600 --> 00:00:03.200 position:50% size:92% align:center
Choose Add Rectangle to cover the entrance and both approaches.

00:00:03.200 --> 00:00:04.840 position:50% size:92% align:center
Draw the rectangle around the area to monitor.

00:00:04.840 --> 00:00:08.040 position:50% size:92% align:center
Select the unused default outline, then remove it.

00:00:08.040 --> 00:00:10.840 position:50% size:92% align:center
Open Motion Detection. Turn it off for this initial crossing test.

00:00:10.840 --> 00:00:12.240 position:50% size:92% align:center
Keep the default person filter and 50 confidence threshold.

00:00:12.240 --> 00:00:13.880 position:50% size:92% align:center
Open Object Size to review the default size bounds.

00:00:13.880 --> 00:00:16.240 position:50% size:92% align:center
Clear Minimum and Maximum to test without size bounds.

00:00:16.240 --> 00:00:17.840 position:50% size:92% align:center
Keep the neutral Region name, or enter a name for your own site.

00:00:17.840 --> 00:00:19.360 position:50% size:92% align:center
Choose Add Polyline. Its Line Name starts empty.

00:00:19.360 --> 00:00:22.560 position:50% size:92% align:center
Drag both endpoints across the workers’ paths, inside the region.

00:00:22.560 --> 00:00:24.040 position:50% size:92% align:center
Enter the line name Loading bay entrance.

00:00:24.040 --> 00:00:25.440 position:50% size:92% align:center
Open the containing region’s Alert Rules.

00:00:25.440 --> 00:00:28.320 position:50% size:92% align:center
Select and remove the initial Detection condition rule.

00:00:28.320 --> 00:00:30.160 position:50% size:92% align:center
Choose Add Alert Rule. The dialog opens at its actual defaults.

00:00:30.160 --> 00:00:32.240 position:50% size:92% align:center
Open Rule type and select Line Cross.

00:00:32.240 --> 00:00:37.360 position:50% size:92% align:center
Replace the stock rule name with Loading bay crossing.

00:00:37.360 --> 00:00:39.600 position:50% size:92% align:center
Change Severity from Warning to Review.

00:00:39.600 --> 00:00:41.680 position:50% size:92% align:center
Choose Loading bay entrance in Line name.

00:00:41.680 --> 00:00:43.880 position:50% size:92% align:center
Keep Either direction, 2-second cooldown and Always hours. Leave Genetec events off.

00:00:43.880 --> 00:00:45.600 position:50% size:92% align:center
Save the completed rule. Its settings now appear in the rule table.

00:00:45.600 --> 00:00:47.760 position:50% size:92% align:center
Apply the complete camera configuration.

00:00:47.760 --> 00:00:50.080 position:50% size:92% align:center
Choose Start to begin the live crossing test.

00:00:50.080 --> 00:00:59.120 position:50% size:92% align:center
When Running appears, select the entrance line to review the preview.

00:00:59.120 --> 00:01:05.120 position:50% size:92% align:center
Watch each worker cross. The live labels identify Loading bay crossing.

00:01:05.120 --> 00:01:10.120 position:50% size:92% align:center
The Crossed label remains with the tracked person after the crossing.