WEBVTT

00:00:00.000 --> 00:00:01.440 position:50% size:92% align:center
Begin with an existing region and PPE detection off. Enable Use PPE Detection.

00:00:01.440 --> 00:00:02.680 position:50% size:92% align:center
Keep Missing selected PPE and Any selected item. Clear Glasses.

00:00:02.680 --> 00:00:03.440 position:50% size:92% align:center
Clear Hard hat.

00:00:03.440 --> 00:00:04.400 position:50% size:92% align:center
Clear Vest to leave only Gloves selected.

00:00:04.400 --> 00:00:05.840 position:50% size:92% align:center
Open Alert Rules. This fresh scene has no rule yet.

00:00:05.840 --> 00:00:07.280 position:50% size:92% align:center
Choose plus. The editor opens with default timing and event generation off.

00:00:07.280 --> 00:00:08.360 position:50% size:92% align:center
Increase Dwell from one to three seconds using the spinner. Keep the other defaults.

00:00:08.360 --> 00:00:09.520 position:50% size:92% align:center
Continue increasing the dwell time.

00:00:09.520 --> 00:00:10.480 position:50% size:92% align:center
The rule now requires three continuous seconds. Keep the other defaults.

00:00:10.480 --> 00:00:11.880 position:50% size:92% align:center
Choose Save. Keep Generate Genetec event off for this test.

00:00:11.880 --> 00:00:13.320 position:50% size:92% align:center
Choose Apply to save the camera configuration.

00:00:13.320 --> 00:00:14.760 position:50% size:92% align:center
Choose Start to process the loading-bay clip.

00:00:14.760 --> 00:00:20.760 position:50% size:92% align:center
Check Running and the red GLOVES annotation on the analyzed person.

00:00:20.760 --> 00:00:22.200 position:50% size:92% align:center
Choose Stop after reviewing the missing-gloves detection.